Dinamap Pro 100V2 Specifikace stáhnout pdf (Strana 46)

• If there is excessive light, cover the sensor with opaque

material.

PROBLEM: A sensor error indicating a bad sensor has

occurred.

CAUSE:

• The sensor or cable may be defective, or the cabling

may be improperly connected.

SOLUTION:

Check the patient.

• If possible, keep the patient still; check whether the

sensor/cable is applied securely and properly, and

replace it if necessary.

• Disconnect and reconnect the sensor.

NELLCOR

OxiMAX™ SpO

Description

The SpO

parameter in the PRO Monitor is available in two

different leading technologies: NELLCOR

OxiMAX and

MASIMO SET

. Please refer to the front of your Monitor to

see which SpO

technology your monitor contains. The

SpO

technology logo will be on the front fascia of the

Monitor. This section refers to NELLCOR SpO

technology.

Functional oxygen saturation (SpO

) of arterial blood is

noninvasively and continuously monitored in the PRO

Monitor using pulse oximetry technology from NELLCOR

Functional SpO

is the ratio of oxygenated hemoglobin to

hemoglobin that is capable of transporting oxygen.

Pulse rate derived from SpO

appears in the Pulse BPM

display (22), and the SpO

pulse indicator (20) flashes

synchronization with the real-time pulse rate measurements

*NELLCOR

is a trademark of Nellcor Puritan Bennett

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 107 108

Žádné komentáře

Dinamap Pro 100V2 Specifikace Strana 46