Dinamap Pro 100V2 Specifikace stáhnout pdf (Strana 24)

allowing SpO

and predictive temperature determinations

to be monitored and recorded (depending on Monitor

model). In the Vitals (UK: All Obs) mode, the blood

pressure is determined one time.

Before each BP determination, the Monitor performs a test

to ensure that the cuff pressure is below a specified level.

The determination is delayed until this condition is met.

During the delay, the BP values are displayed as zero.

The Monitor senses the type of hose being used and

automatically uses adult/pediatric monitoring parameters or

neonatal monitoring parameters, as appropriate.

Audible and visible alarms occur when a value for systolic

pressure, diastolic pressure, mean arterial pressure, or pulse

rate is outside the selected high or low limit.

Instructions for cleaning and disinfecting BP cuffs are in

Appendix F.

General Warnings

• The PRO Monitor will not measure blood pressure

effectively on patients who are experiencing seizures or

tremors.

• Arrhythmias will increase the time required by the PRO

Monitor to determine a blood pressure and may extend

the time beyond the capabilities of the Monitor.

• In Manual mode, the PRO Monitor displays the results

of the last blood pressure determination for a duration

of time set by the user or until another determination is

completed. If a patient’s condition changes between

one determination and the next, the Monitor will not

detect the change or indicate an alarm condition.

• Devices that exert pressure on tissue have been

associated with purpura, skin avulsion, compartmental

syndrome, ischemia and/or neuropathy. To minimize

these potential problems, especially when monitoring

at frequent intervals or over extended periods of time,

make sure the cuff is applied appropriately and

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 107 108

Žádné komentáře

Dinamap Pro 100V2 Specifikace Strana 24