Dinamap Pro 100V2 Servisní příručka stáhnout pdf (Strana 63)

Revision A PRO 100-400 V2 Patient Monitor Service Manual 4-11

2009829-001

Calibration & Maintenance: SECTION 4. GENERAL MAINTENANCE

Select Reset to return all the alarm limits to the default settings. The

illustration above shows the default settings.

The user can adjust the alarm limits within the ranges specified in the

table below. The high limit must be at least one step higher than the

low limit.

Note: Predictive temperature has no alarm limit alarm.

Select Save to save the displayed settings and return to the More…

menu. Select Cancel to abandon any changes and return to the

More… menu.

4.5. SERVICE MODE

The Service Mode provides the same features as the Clinician Mode

and adds these functions:

 Check the BP calibration

 Re-calibrate BP

 Adjust the pneumatic system overpressure point

 Configure communications with a host computer

 Change the language of operation

4.5.1 Accessing the Service Mode

To enter Service Mode from the Main menu, use the rotor and LCD.

1. Select the More… button.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 103 104

Žádné komentáře

Dinamap Pro 100V2 Servisní příručka Strana 63